19 Most Wanted Ardupilots

 

Waterwood Horizontal Side Pin APM 28 Flight Controller Board For Multicopter Ardupilot

Waterwood Horizontal Side Pin APM 2.8 Flight Controller Board For Multicopter Ardupilot

Waterwood Horizontal Side Pin APM 2.8 Flight Controller Board For Multicopter Ardupilot - One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Osd interface with the improved data transmission at the same time, effectively avoid the interference from the log. This revision of the board has onboard compass. This is the new apm 28 autopilot module, upgraded version 25 26. The original df13-5p gps interface and sm06b gps interface function reuse, no significance.

 

GoolRC APM 28 V28 ArduPilot UAV Flight Controller Neo-6M GPS Antenna Foldable Stand Amount Power Module 915Mhz Radio Telemetry Transmision

GoolRC APM 2.8 V2.8 ArduPilot UAV Flight Controller & Neo-6M & GPS Antenna Foldable Stand Amount & Power Module & 915Mhz Radio Telemetry Transmision

GoolRC APM 2.8 V2.8 ArduPilot UAV Flight Controller & Neo-6M & GPS Antenna Foldable Stand Amount & Power Module & 915Mhz Radio Telemetry Transmision - This is the new apm 28 autopilot module the sensors are exactly the same as with apm25+, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Atmel’s atmega2560 and atmega32u-2 chips for processing and usb functions respectively.

 

Ericoco APM Flight Controller Board w Side-Pin Connectors for ARDUPILOT MEGA 26

Ericoco APM Flight Controller Board w/ Side-Pin Connectors for ARDUPILOT MEGA 2.6

Ericoco APM Flight Controller Board w/ Side-Pin Connectors for ARDUPILOT MEGA 2.6 - Arduino compatible includes 3-axis gyro, accelerometer , along with a high-performance barometer. Atmel’s atmega2560 and atmega32u-2 chips for processing and usb functions respectively. On-board 4 megabyte dataflash chip for automatic datalogging optional off-board gps. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000.

 

Overfly Ardupilot Flight Controller Board On-Screen Display APM OSD MinimOSD、OSD Board MinimOSD APM Telemetry to APM20 APM25 APM 1 APM 2 On-Screen Display APM OSD MinimOSD Ardupilot Flight Controller Board

Overfly Ardupilot Flight Controller Board On-Screen Display APM OSD MinimOSD、OSD Board MinimOSD APM Telemetry to APM2.0 APM2.5 APM 1 APM 2 /On-Screen Display APM OSD MinimOSD Ardupilot Flight Controller Board

Overfly Ardupilot Flight Controller Board On-Screen Display APM OSD MinimOSD、OSD Board MinimOSD APM Telemetry to APM2.0 APM2.5 APM 1 APM 2 /On-Screen Display APM OSD MinimOSD Ardupilot Flight Controller Board - 0 apm2. Description osd board minimosd apm telemetry to apm2. 7″w x 1. 7″l (2. 5 apm 1 apm 2 on-screen display apm osd minimosd ardupilot flight controller board specification atmega328p with arduino bootloader max7456 monochrome on-screen display ftdi cable compatible pinout standard 6-pin isp header two independent power sections with an led indicator on each solder jumpers for combining the power sections +5v 500ma regulator for up to +12v supply input solder jumper for pal video option exposed test points for hsync and los dimensions 0. 4″ w/ pins as shown) x 0. 3″h package list 1 x minimosd board.

 

Water Wood Apm Flight Controller Board W Side-Pin Connectors For Ardupilot Mega 26

Water & Wood Apm Flight Controller Board W/ Side-Pin Connectors For Ardupilot Mega 2.6

Water & Wood Apm Flight Controller Board W/ Side-Pin Connectors For Ardupilot Mega 2.6 - One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Includes 3-axis gyro, accelerometer , along with a high-performance barometer. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. Atmel’s atmega2560 and atmega32u-2 chips for processing and usb functions respectively. On-board 4 megabyte dataflash chip for automatic datalogging.

 

TeraR APM26 flight controller board multirotor ARDUPILOT MEGA 26 Multicopter ARDUPILOT MEGA 26 Version in the corresponding flight control

TeraR APM2.6 flight controller board multirotor ARDUPILOT MEGA 2.6 Multicopter ARDUPILOT MEGA 2.6 Version in the corresponding flight control

TeraR APM2.6 flight controller board multirotor ARDUPILOT MEGA 2.6 Multicopter ARDUPILOT MEGA 2.6 Version in the corresponding flight control - Parallel import goods. Cable length about 232mm weight about 42g the set includes flight controller board ~ 1. Compatible models apm 26 apm size about 70 44 14mm. Complete open source autopilot system. For the corresponding exchange to ardupilot mega 26 multicopter ardupilot mega 26.

 

Waterwood Power Supply Module wBEC APM2 25 APM Flight Controller ARDUPILOT MEGA APM26

Waterwood Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6

Waterwood Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6 - Another signal cable connectors are used in japan original fittings, non-domestic joint, so apm flight control board and reliable connection between the power supply module. Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. Use your aircraft’s own esc/bec for that. It isnotdesigned to power servos. 3v and a maximum of 2. Specifications max input voltage 30v max current sensing 90a size 25219mm net weight 25g voltage and current measurement configured for 5v adc switching regulator outputs 5. The on-board switching regulator outputs 5. The maximum input voltage 20v, maximum current measurable 90a, to achieve the control panel on battery power and voltage monitoring. 3v and 3a max 6-pos df13 cable plugs directly to apm 2. In addition the module also comes with bec function, you can output 5. The power module comes completely assembled with deans connectors, and wrapped in shrink tubing for protection. 5 with clean power from a lipo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. 3 dc, 3a maximum continuous current for the flight control board to provide a stable power supply. 25a from up to a 4s lipo battery. Description the apm 2. 5’s “pm” connector package included 1 x power module with xt60 connectors 1 x cable 150mm note the power module is only designed to power apm, a rc receiver and apm accessories (gps, 3dr radio). The design parameters of voltage and current detector design parameters consistent with 3dr official ground station (mission planer) settings can be set directly refer to the official wiki. 5 power module is a simple way of providing your apm 2.

 

QWinOut Ardupilot Arduplane Pitot Tube Special for APM 25 26 Arduplane Airspeed Sensor

QWinOut Ardupilot Arduplane Pitot Tube Special for APM 2.5 2.6 Arduplane Airspeed Sensor

QWinOut Ardupilot Arduplane Pitot Tube Special for APM 2.5 2.6 Arduplane Airspeed Sensor - The new design, installation more convenient. Quantity ardupilot arduplane pitot tube x1.

 

Horizontal Side Pin APM 28 Flight Controller Board For Multicopter Ardupilot by lanlan

Horizontal Side Pin APM 2.8 Flight Controller Board For Multicopter Ardupilot by lanlan

Horizontal Side Pin APM 2.8 Flight Controller Board For Multicopter Ardupilot by lanlan - This is the new apm 28 autopilot module, upgraded version 25 26. The original df13-5p gps interface and sm06b gps interface function reuse, no significance. This revision of the board has onboard compass. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer or gyro mpu-6000. 100% brand new and high quality.

 

Power Module With BEC V10 for 5 Apm 26 Ardupilot Mega Flight Controller

Power Module With BEC V1.0 for 5 Apm 2.6 Ardupilot Mega Flight Controller

Power Module With BEC V1.0 for 5 Apm 2.6 Ardupilot Mega Flight Controller - Input voltage 2~6s lipo battery (max 28v). Switching regulator outputs 53v and 3a max. Voltage and current measurement configured for 5v adc. Max current sensing 90a. Power module is a simple way of providing your apm/arduflyer with clean power from a lipo battery as well as current consumption and battery voltage measurements, all through a 6p cable the on-board switching regulator outputs 53v and a maximum of 3a from up to a 6s lipo battery special for apm252 apm26 pixhawk flight controllerspecificationsdeans plug.

 

Happymodel APM 28 GPSRadio TelemetryOSDCurrent SensorShock Absorber For ArduPilot

Happymodel APM 2.8 +GPS+Radio Telemetry+OSD+Current Sensor+Shock Absorber For ArduPilot

Happymodel APM 2.8 +GPS+Radio Telemetry+OSD+Current Sensor+Shock Absorber For ArduPilot - Onboard 16mbit data flash chip for automatic data logging atmel’s atmega2560-16au and atmega32u-2 chips for processing and usb functions respectively. Includes both right angle and straight pins for i/o, allowing user to customize as needed. Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. For ardupilot. Digital compass powered by hmc5883l chip, included on the main board.

 

Qiyun Power Supply Module wBEC APM2 25 APM Flight Controller ARDUPILOT MEGA APM26

Qiyun Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6

Qiyun Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6 - The power module comes completely assembled with deans connectors, and wrapped in shrink tubing for protection. 25a from up to a 4s lipo battery. In addition the module also comes with bec function, you can output 5. 5 power module is a simple way of providing your apm 2. The on-board switching regulator outputs 5. 3 dc, 3a maximum continuous current for the flight control board to provide a stable power supply. Featuresthe apm 2. 5 with clean power from a lipo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. 3v and a maximum of 2. Package include1power module with xt60 connectors1p cable 150mm. Another signal cable connectors are used in japan original fittings, non-domestic joint, so apm flight control board and reliable connection between the power supply module.

 

RipaFire Mini APM V31 ArduPilot Mega Flight Controller Board  NEO-M8N GPS Combo for RC Multicopter

RipaFire® Mini APM V3.1 ArduPilot Mega Flight Controller Board + NEO-M8N GPS Combo for RC Multicopter

RipaFire® Mini APM V3.1 ArduPilot Mega Flight Controller Board + NEO-M8N GPS Combo for RC Multicopter - 1 flight controller board 1 x neo-m8n gps please notesold only by ripafire,ripafire company never sold these items to other vendors, be careful our products have been tested, if any problem, please contact us at the first time so that we can supply the best service for you. 1 flight controller board +neo-m8n gps combo 2. 5cm 3. Weight 57g package includes 1 x ripafire® apm3. Item apmv3. Specification 1. 5×1. Size 3. 5 x3.

 

Eztronics Corp APM26 APM Flight Controller Board For Multicopter ARDUPILOT MEGA 26 Version

Eztronics Corp® APM2.6 APM Flight Controller Board For Multicopter ARDUPILOT MEGA 2.6 Version

Eztronics Corp® APM2.6 APM Flight Controller Board For Multicopter ARDUPILOT MEGA 2.6 Version - Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Includes 3-axis gyro, accelerometer along with a high-performance barometer. Onboard 4 mp dataflash chip for automatic datalogging. Comes pre-soldered (with straight pins) and tested.

 

Tera APM Flight Controller Board with Side-Pin Connectors for ARDUPILOT MEGA 26

Tera APM Flight Controller Board with Side-Pin Connectors for ARDUPILOT MEGA 2.6

Tera APM Flight Controller Board with Side-Pin Connectors for ARDUPILOT MEGA 2.6 - On-board 4 megabyte dataflash chip for automatic datalogging optional off-board gps. Barometric pressure sensor upgraded to ms5611-01ba03, from measurement specialties. One of the first open source autopilot systems to use invensense’s 6 dof accelerometer/gyro mpu-6000. Atmel’s atmega2560 and atmega32u-2 chips for processing and usb functions respectively. Arduino compatible includes 3-axis gyro, accelerometer , along with a high-performance barometer.

 

APM28 ArduPilot Flight Controller6M GPS915Mhz Telemetry Power Module RC150

APM2.8 ArduPilot Flight Controller+6M GPS+915Mhz Telemetry+ Power Module RC150

APM2.8 ArduPilot Flight Controller+6M GPS+915Mhz Telemetry+ Power Module RC150 - Package included-1 apm2. 8 flight controller-arduino compatible-includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometergpsfeatures-built-in compass gps module-main chip ublox-6m3dr radio telemetry kit 915 mhzintroduction-this board can be used for crius aiop and arduflyer / ardupilot-mega. Note the power module is only designed to power apm/arduflyer, a rc receiver and accessories (gps, radio telemetry). 8 board with case-1 neo-6m gps module with compass ic-1 miniosd-1 power module-1 3dr radio telemetry kit 915mhz-1 cables set-1 shock absorber. 3v and a maximum of 3a from up to a 7s lipo battery. Power module is a simple way of providing your apm/arduflyer with clean power from a lipo battery as well as current consumption and battery voltage measurements, all through a 6p cable. It is not designed to power servos. Note the power module is only designed to power apm/arduflyer, a rc receiver and accessories (gps, radio telemetry). Apm2. The on-board switching regulator outputs 5. No more heating problems when using this osd board. The on-board switching regulator outputs 5. -Mavlink-osd with switching dc/dc stepdown powersupply to maximize efficiency on power system. 0introductionpower module is a simple way of providing your apm/arduflyer with clean power from a lipo battery as well as current consumption and battery voltage measurements,all through a 6p cable. Features-atmega328p microcontroller-max7456-eui monochrome on-screen displayapm arduflyer power module v1. 3v and a maximum of 3a from up to a 7s lipo battery. Use your aircraft’s own esc/bec for that.

 

New Power Supply Module wBEC APM2 25 APM Flight Controller ARDUPILOT MEGA APM26

New Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6

New Power Supply Module w/BEC APM2 2.5 APM Flight Controller ARDUPILOT MEGA APM2.6 - Package include 1power module with xt60 connectors 1p cable 150mm. Switching regulator outputs 53v and 3a max. Voltage and current measurement configured for 5v adc. Specifications max input voltage 30v max current sensing 90a size25219mm net weight25g weight 35g. Power supply module w/bec apm2 25 apm flight controller ardupilot mega apm26, this product is ecsem brand, in order to protect your rights, please order the genuine in best_express other sellers are counterfeit products, we are not responsible for the fakes you bought from other counterfeit seller.

 

Gowe APM 26 ArduPilot Mega 26 Multicopter UAV Flight Control Board APM26GPS w External Compass  Protective Case

Gowe APM 2.6 ArduPilot Mega 2.6 Multicopter UAV Flight Control Board APM2.6+GPS w/ External Compass + Protective Case

Gowe APM 2.6 ArduPilot Mega 2.6 Multicopter UAV Flight Control Board APM2.6+GPS w/ External Compass + Protective Case - Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer. Onboard 4 megabyte dataflash chip for automatic datalogging. Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally. Optional off-board gps, ublox lea-6m module with compass. Arduino compatible.

 

Tera On-Screen Display Ardupilot Mega MinimOSD Rev 11 OSD diy drones APM2 APM25 APM26

Tera On-Screen Display Ardupilot Mega MinimOSD Rev. 1.1 OSD diy drones APM2 APM2.5 APM2.6

Tera On-Screen Display Ardupilot Mega MinimOSD Rev. 1.1 OSD diy drones APM2 APM2.5 APM2.6 - Perfect combination of atmega328 and max7456. Uses mavlink osd. Flight control os functions. Note please don’t connect the osd when your apm 2 is also connected via usb (they share the same port) make sure you disconnect your usb cable from the apm 2 board before attempting to use the osd. Supports mavlink protocol supports pirate apm252 apm 26 flight model.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.